Step 1: While in the Hach WIMS client, select Edit/View Variables and click the Interface tab.

Step 2: The browser connection must be properly configured. In the Hach WIMS client:

• Select System Tables -> Entire System -> Server-Side Interface Setup.

• Select the Edit button for the Raco Catalyst entry that you want to enable the browser for.

Note: If there is no entry, click New to add one. If the (12542) Hach WIMS Indirect Server-Side Interface to Raco Catalyst interface entry does not show up in the Definition Browser; click Cancel, then click New Definition to add the definition file. This can be found in the same folder as the Q12542 interface - look for 12542.G2_SERVER_LU file.

• Click on the Browser tab and enter the location of the exported tag list OPSDATAXML file generated in the Source Configuration section of the Interface. The browser will search this file for the available Tag Names. Make sure Browser Enabled is checked and click OK button.

You are ready to view tags from the HMI. Click on System Setup  -> View/Edit Variables and click on the Interface tab.

Click the button with a ? (question mark) on it as shown below:

The browser will load:

Select the appropriate Tag Name and click OK.