|
To configure WIMS modeling for your facility, the size and capacity of the facility must be defined. Clarifier setup is used to define the number and size of clarifers. It also allows you to select the variables you use to track your clarifiers. |
 |
FIELDS:
Clarifier: Enter the name of the clarifier (i.e. Clarifier 1, North, East)
Surface Area: Enter the surface area of the clarifier in square ft (ft2).
Effluent TSS: Choose the variable you use to track the Clarifier Effluent TSS concentration in mg/L. This is often your Effluent TSS.
RAS TSS: Choose the variable you use to track the Recycle Sludge Suspended Solids concentration in milligrams per liter.
Wastage Rage (mgd): Choose the variable for Waste Sludge Flow Rate (Waste Flow) in Millions of Gallons a day.
BUTTONS:
 |
Moves to the first record in the list. |
 |
Moves to the previous record in the list. |
 |
Moves to the next record in the list. |
 |
Moves to the last record in the list. |
 |
Moves you to the first blank row where you can enter your information for a new clarifier. |
 |
Deletes the currently selected basin. |
 |
Saves all changes made and closes the form. |
 |
Exits the form, changes are not saved. |