Used to place summary statistics for a date range for a variable (i.e. GAVG, GMAX, GMINZ functions) on a spread report.

Fields:

Variable: Sets the variable to summarize

Stat: Sets the summary statistic to use.  Choose one from the following on the dropdown list:

Minimum	Finds the minimum value
Maximum	Finds the maximum value
Total	Sum of all values found
Average	Sum all values and divide by the number of values found
Avg Over Time	Sum all values found, then divide by the number of data slots in the date range
Avg Median	Calculates the Average or Median according to the California Average Median Rules.
Geo Mean (Ignore 0)	Calculate the Geometric Mean ignoring Zeros
Geo Mean (Convert 0 to 1)	Zeros are converted to one (1) before geometric mean is calculated.
Geo Mean (Add One to All)	If any value is zero (0), one is added to each value in the set and then one is subtracted from the result.
# of Daily Violations	Counts the number of times the daily value is above the daily max limit or below the daily min limit.
Geo Mean (Median)	Calculates the Geometric Mean or Median according to the California Average Median Rules.  See GGMMEDZ function.
# Samples	Counts the number of samples
Median	The median is the number in the middle of a set of numbers; that is, half the numbers have values that are greater than the median, and half have values that are less.
Standard Deviation	Calculates the standard deviation for the variable
Range	The difference between the max and min value
First	Finds the first value that exists in the date range for the variable
Last	Finds the last value that exists in the date range for the variable
Average Difference	Returns the average of the differences (i.e. the value minus the last value found) for all values in the date range.  The difference is calculated based on the difference type setting (see below).
Maximum Difference	Returns the maximum of the differences (i.e. the value minus the last value found) for all values in the date range.  The difference is calculated based on the difference type setting (see below).
Minimum Difference	Returns the minimum of the differences (i.e. the value minus the last value found) for all values in the date range.  The difference is calculated based on the difference type setting (see below).
Total Difference	Returns the total of the differences (i.e. the value minus the last value found) for all values in the date range.  The difference is calculated based on the difference type setting (see below).
Conditional Count	Returns the count of values that meet the condition specified by Condition and Limit.

Locate Statistic for: Sets the number of values to place and the grouping of the data.  For example, to summarize a column of daily values for one month, enter 1, or, to place a statistic for 12 consecutive months, enter 12.  The drop down list sets the grouping parameter in the Group function (ie GAVG, GMAX).

Group By	Description	Grouping Parameter in Formula
Hours	Group Data by hours (typically used to summarize 15 minute, 1 minute,etc... date)	"H"
Partial Days	Group data by certain hours of the day (i.e. 8AM thru 5PM).  When this option is selected you will be prompted to set the Start Time and Stop Time for the grouping.	"Hx:x"
Days	Group data by days (typically used to summarize data from hourly, 15 Minute, 1 minute, etc... data)	"D"
Months	Group data by months	"M"
Quarters	Group data by entire quarter	"Q"
Semi-Annuals	Group data by Jan - June and July - Dec.	"SA"
Seasons	Group data by Winter, Spring, Summer, Fall	"S"
Years	Group data by Calendar years	"Y"
Year to End Date	Group data from start of year through the end date of the report	"YTD"
Year to Start Date	Group data from start of the year though one day before the start date of the report	"YTBSD"
Moving 12 Month	Group data by 11 months prior to the Start Date through the end of the month of the start date.	"MAxx"
Moving N Day	Group data by N number of days.  You will be prompted for the number of days.	"MOVx"
Report Dates	Group data from Start Date of report through the End Date of the Report.	"R"
All (1970 - Now)	Calculate Statistic for all data (1970 through the current date)	"A"

Place < or > Symbol with statistic:  If the variables allow entry of data qualifiers (i.e. <, >, or ND) do you want the symbol to be placed with the calculated statistic. If checked and a statistic that does not find a particular value (i.e. Max, Min, First... find a value, Avg, GeoMean, Total do not) is chosen the following options will be given:

"if one value contains a < or >"
"if all values contain a < or >"
"if half the values are < or >"
"cascade all symbols"

Decimal Places:  The number of digits to show behind the decimal point.  This value will default to the number of decimal places defined in the description of the variable selected.  See Also: Formatting with 'Not Fixed'

Place Data Across: When placing data into the report, locate across columns instead of down rows.  

Locate data backward in time:  If checked, data will be placed for previous time periods instead of next time periods.  For example, if you are locating 12 monthly averages and you want the current month and the previous 11 months you would check this box.

Order by Date:  Locate data Ascending by date or descending

Place Start Date of Group: If checked, places the start date of each group beside the data. 

Place End Date of Group: If checked, places the end date of each group beside the data.

Print ______ if no data found: Can only be used if placing data with the Place <,>, or ND Symbol with statistic option checked.  Will print the specified string (no data, no samples...) if no values for the group are found. 

Print the "Optional Print Value" if the Threshold Valve is crossed:  If checked, the optional print value from system setup will be printed instead of the actual value when the threshold is crossed. 

Download Example Template: Help_Place_Data_Across.ss3 (Click here for download instructions)